How to Connect a Beko Plumbed Fridge Freezer to a Demijohn

Connecting your plumbed Beko fridge freezer to a demijohn is an efficient way to ensure a

steady supply of water. Follow this simple step-by-step guide to get your fridge freezer

connected properly.

Step 1: Unplug the Fridge

Before starting any connections, unplug the fridge from the power source to ensure safety

during installation.

Step 2: Prepare the Water Pump

Use a water pump that is recommended by an authorized service for a carboy or

demijohn water connection. This pump is essential for the smooth transfer of water from

the demijohn to your fridge freezer.

Step 3: Remove the Connector

Locate the hose nozzle on the water valve at the back of your fridge. Remove the

connector from the hose and pass the hose through the connector. This will prepare the

hose for attachment to the pump.

Step 4: Tighten the Connector

Once the hose is passed through, tighten the connector on the water valve. You can do

this by hand or use a pipe wrench or pliers for a secure fit.

Step 5: Connect the Pump

Plug in the water pump and connect the hose to the pump. Ensure the connection is

secure by firmly pushing the hose into the pump.

Step 6: Insert the Pump Pipe into the Demijohn

Carefully insert the pipe of the pump mechanism into the demijohn and ensure it is

tightly closed. This step is crucial to avoid leaks and maintain proper water flow.

Step 7: Start the Pump

Once everything is connected, plug in the pump and start it. Wait for 3 minutes to allow

the water to flow from the demijohn to the fridge freezer.

By following these steps, your plumbed Beko fridge freezer will be successfully connected

to a demijohn, ensuring a continuous water supply for optimal performance.